BeatMaker Support

Focus Actions list

Follow

This articles describes the list of Focus Actions that can be controlled using an external MIDI controller within BeatMaker:

Focus Action name

Description

TRIGGER PAD (from 1 to 64)

Triggers the corresponding pad of the currently active bank within the Performance view

MODE: SELECT

Controls the state of the “SELECT” button located in the Performance view (enables or disables pad selection mode)

MODE: SCENE

Controls the state of the “SCENE” button located in the Performance view (enables or disables scene trigger mode)

MODE: MUTE

Controls the state of the “MUTE” button located in the Performance view (enables or disables pads mute mode)

MODE: SOLO

Controls the state of the “SOLO” button located in the Performance view (enables or disables pads solo mode)

TOGGLE PAD KEYS

Controls the state of the “KEYS” button located in the Performance view (switches the currently selected pad between keys and pad mode)

MACRO CONTROL (from 1 to 16)

Controls the corresponding Macro knob from the Macro Panel

SELECT BANK (from A to H)

Sets the selected bank of the currently displayed bank group in the Performance view

PREV. BANK

Switches the currently selected bank to the previous one (i.e. if Bank B is selected, Bank A now becomes selected)

NEXT BANK

Switches the currently selected bank to the next one (i.e. if Bank A is selected, Bank B now becomes selected)

SELECT BANK GROUP (from 1 to 16)

Sets the currently displayed bank group in the Performance view

PREV. BANK GROUP

Switches the currently displayed bank group to the previous one (i.e. if Bank group 2 is displayed, Bank group 1 is now displayed)

NEXT BANK GROUP

Switches the currently displayed bank group to the next one (i.e. if Bank group 1 is displayed, Bank group 2 is now displayed)

OCTAVE/PAGE DOWN

If Keys mode is enabled on the currently selected pad, switches the display of pads to one octave lower

OCTAVE/PAGE UP

If Keys mode is enabled on the currently selected pad, switches the display of pads to one octave up

REPEAT SLOT (from 1 to 6)

Controls the enabled/disabled state of the corresponding “REPEAT” button from the Performance view

TRANSPORT controls

Triggers the corresponding buttons from the Transport toolbar. TEMPO is used for the TAP TEMPO feature

 

Was this article helpful?
8 out of 11 found this helpful

Comments